Tips and Tricks of Start a Petrol Engine in Bangladesh

Welcome, carpricebd.com. Today we want to discuss with you about Motor Car Drivers Tips and Tricks of Start a Petrol Engine. We all know that for safety and security issues we carpricebd.com team request you all who are drives please read the following Tips and Tricks of Start a Petrol Engine for the motor car.

This time the nine rules for starting petrol are being summarized. If you want to know or learn to drive, you should know it well first. When you first sit in the driver's seat, you can see the handle attached to the gear lever or a rod under the steering wheel. And there are devices connected to the dashboard. Below are three paddles which have already been mentioned.

The gear needs to be neutralized first or with the sin in the clutch with the foot. It remains to be seen whether it is properly neutral. If the gear is fitted, it must be tilted to one side. It is not obligatory to start the car in this situation.  

The car has to start after the gear is neutral. First, you have to turn on the Epson with the help of the body with the ignition switch. Then you have to look at the petrol tank and the ampere meter to see if the battery and petrol are OK, then you have to turn the key and start the engine. Press with the right foot. In the accelerator. Immediately switch on the starter.

When the engine is started, the starter should be switched off and the oil pressure gauge should be working properly. Once the engine starts, you need to see if all the other parts are working properly. This time we have to see if the self-starter is working properly. If it does not, then you have to start by hitting the handle.

The engine is started by inserting the handle through the hole in the bottom of the radiator in front of the car and turning it 4/5 times loudly. The handle is shaped like the Bengali letter 'D', with a pin on one end. Or rotating it after it gets stuck inside causes the engine to start. When the engine starts, the handle has to be taken out.

When the engine starts, you have to press the accelerator. Then the speed of the car is increased by changing the gears while the car is running. If the car is moving, it depends on the steering and gears to rotate or increase the speed. If you want to stop the speed, you have to apply the brakes.

Push start the car:

Most people don’t keep a set of mechanic’s tools in their trunk. So when you get stranded with a dead engine, you feel pretty helpless. But don’t give up right away. We’ve compiled a list of tricks you can try, and none of them require tools. They’re arranged by symptom, and you’ve got nothing to lose by trying them. Of course, they won’t fix the root problem, but one of them just might get the engine started so you can head to the nearest mechanic to have the problem fixed.

Many times the car suddenly stops moving. This often happens in the winter or rainy season. If the car does not start at this time, it has to be started by pushing. When starting the car by pushing, the ignition switch has to be turned on and the gear has to be neutralized. Then you have to push the car with another car or with people. As a result of the collision, the car will start moving slowly. At that time you have to use the second gear by pressing with the clutch or foot. Then very quickly release the clutch pedal and press the accelerator. This causes the engine to start. If it does not start then the engine should be heated with heat.